JenFab LeanClean 360-2清洗机
The LeanClean 360-2 model cleans two baskets side by side at the same time.
This provides thorough, more efficient cleaning, rinsing, and drying as well as easier loading than baskets which are stacked atop one another.
The Jenfab LeanClean 360-2 is a Front Loading Rotating Basket Parts Washer ideal for general parts washing, cleaning screw machine parts, machined parts, precision stampings and automotive stampings. It also provides critical cleaning of precision parts and orthopedic components. The 360-2 offers the most powerful ultrasonic cleaning action available through its advanced European tubular transducers with digital generators which offer over 95% output, more than what any other type of ultrasonic can provide.
Wash and rinse solution tanks are located below the cleaning chamber. During the cleaning cycles the solutions are filtered and recirculated on a continual basis into and through the cleaning chamber. The baskets rotate in solution as powerful water jets purge the parts with fresh filtered solution. The cleaning chamber is completely purged with fresh filtered solution nearly two times each minute which insures that even the most complex parts with blind holes are cleaned thoroughly. The continuous separation of chips and oil ensures a longer bath life.
The LeanClean 360-2 is designed to process two standard Jenfab baskets 12 x 20 x 8 or two smaller baskets, 12 x 18 x 6. The Jenfab baskets have three times the net volume of the smaller baskets. The chamber can also accept large parts weighing over 250 lbs. with dimensions of 24 x 20 x 8.
One of the most important advantages of the Jenfab LeanClean 360-2 is the baskets are loaded and cleaned side by side. Side by side loading provides better cleaning, rinsing, and drying than stacking baskets on top of one another. In addition to better cleaning and drying, the baskets can be loaded faster and the parts are cleaned and dried faster.
The Jenfab Super Dryer will dry parts other systems cannot. Our 3000 CFM recirculating air flow design dries up to two times faster at lower temperatures and will less energy than regenerative types. Additionally our recirculating design dumps less heat into the plant atmosphere which produces even greater benefits.
LeanClean 360-2模型同时将两个篮子并排清洁。这提供了更彻底、更高效的清洁、清洗和干燥，也比堆叠在一起的篮子更容易装载。Jenfab LeanClean 360-2是一种用于一般零件清洗、清洗螺杆机械零件、机械零件、精密冲压件和汽车冲压件的前装旋转篮件垫圈。它还提供精密零件和矫形件的关键清洗。360-2提供了最强大的超声波清洗机，通过其先进的欧洲管式换能器，提供超过95%的输出，超过任何其他类型的超声波所能提供的。清洗和冲洗溶液槽位于清洁室下方。在清洗周期中，溶液经过过滤，并在连续的基础上循环往复，进入清洁室。当强大的水柱用新鲜的过滤溶液清洗零件时，篮子会在溶液中旋转。清洗室每分钟用新鲜的过滤溶液清洗近两倍，以确保即使是最复杂的部分也要彻底清洗。晶片和油的连续分离确保了更长的洗浴时间。LeanClean 360-2被设计用于处理两个标准的Jenfab篮子12 x 20 x 8或两个较小的篮子，12 x 18 x 6。Jenfab篮子的净体积是小篮子的三倍。该商会还可以接受重量超过250磅的大部件。尺寸为24 x 20 x 8。Jenfab LeanClean 360-2的一个最重要的优点是，篮子被并排地装载和清洗。侧边加载提供了更好的清洁、漂洗和干燥，而不是堆叠在一起。除了更好的清洁和干燥，篮子还可以更快地装载，零件也可以更快地清洗和干燥。Jenfab超级干燥机将会干燥其他系统不能的部分。雷火电竞官网的3000 CFM再循环气流设计在较低的温度下干燥速度快2倍，并且比再生型的能量更少。此外，雷火电竞官网的再循环设计将较少的热量释放到植物的大气中，从而产生更大的效益。
|Floor Space:||6'W x 7' D x 7'6" H|
|Load Height:||42" load capacity 300 lbs.|
|Tank Volume:||200 gallons each Wash, Rinse|
|Pump Volume:||120 GPM @ 40 PSIG|
|Dryer Blower:||3000 CFM Recirculating|
|Tank Heat Wash and Rinse:||15KW up to 160° F|
|Dryer Heat:||20 KW up to 190° F|
|Sound Level:||<78 DBA|
|Controls||PLC Controlled with OIT / HMI, Diagnosis and Modem|
|Basket Size:||Up to two 12 x 22 x 8" OR|
|one 26 x 22 x 8"|
|Basket Size for 360-2 XL Model:||26" W x 22" D x 18" H|
|Production Cycles per Hour:||Up to 20 stainless baskets over 22 cubic ft./hour|
|Stainless Steel Tanks, Chamber|
|Filter Large #2 Bag with quick change swing top head|
|Chip Collection Baskets (Easy Lift Out)|
|Fork Lift Pockets|